HPE FlexNetwork MSR Series User Manual

172
Figure 185 Static route configuration page
3. Configure static routes as described in Table 98.
Table 98 Configuration items
Item Description
Destination IP Address
Enter the destination IP address of the static route, in dotted decimal
notation.
Mask
Enter the mask of the destination IP address.
You can enter a mask length or a mask in dotted decimal notation.
Preference
Enter a preference value for the static route. The smaller the number, the
higher the preference.
For example, specifying the same preference for multiple static routes to the
same destination enables load sharing on the routes, while specifying
different preferences enables route backup.
Next Hop Enter the next hop IP address of the static route, in dotted decimal notation.
Interface
Select the outgoing interface of the static route.
If you select
Null 0
, the destination IP address is unreachable.
Displaying the active route table
Select Advanced > Route Setup from the navigation tree to display the Summary tab.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English