276
Figure 299 Bandwidth control configuration
Table 135 describes the bandwidth control configuration items.
Table 135 Configuration items
Item Description
Please select a user
group
Set the user group for bandwidth control configuration.
When there are more than one user group, the option
all
is available. Selecting
all
means that the bandwidth control configuration applies to all the user groups.
CIR
Set the committed information rate (CIR), that is, the permitted average rate of
traffic.
CBS
Set the committed burst size (CBS). CBS is the token bucket capacity, that is, the
maximum traffic size that is permitted in each burst.
The CBS value must be greater than the maximum packet size.
IMPORTANT:
By default, the CBS is the number of bytes transmitted in 500 ms at the rate of CIR.
If the number exceeds the value range, the allowed maximum or minimum value is
adopted.
Configuring packet filtering
Select Advanced > Security > Packet Filter from the navigation tree to enter the Packet Filter
page, as shown in Figure 300.
To Next Page
Loading...
Need help?
General
