62
Table 39 Configuration items
Item Description
Radio Unit Radio ID, 1 or 2.
Mode Radio mode, which depends on your device model.
Wireless Service Name
Set the service set identifier (SSID).
An SSID should be as unique as possible. For
security, the company name should not be contained
in the SSID. Meanwhile, it is not recommended to use
a long random string as the SSID, because it only
adds the Beacon frame length and usage complexity,
without any improvement to wireless security.
Wireless Service Type
Select the wireless service type:
• clear—The SSID is not encrypted.
• crypto—The SSID is encrypted.
Configuring clear type wireless service
Configuring basic settings for clear type wireless service
1. Select Interface Setup > Wireless > Access Service from the navigation tree.
2. Click the icon for the target clear type wireless service.
Figure 40 Configuring clear type wireless service
Table 40 Configuration items
Item Description
Wireless Service Display the selected Service Set Identifier (SSID).
VLAN (Untagged)
Enter the ID of the VLAN whose packets are to be sent
untagged. VLAN (Untagged) indicates that the port sends the
traffic of the VLAN with the VLAN tag removed.
Default VLAN
Set the default VLAN of a port.
By default, the default VLAN of all ports is VLAN 1. After you set
the new default VLAN, VLAN 1 is the ID of the VLAN whose
packets are to be sent untagged.
Delete VLAN
Remove the IDs of the VLANs whose packets are to be sent
untagged and tagged.
To Next Page
Loading...
Need help?
General
