398
Item Description
Register Function
• Enable. The following registration parameters are configurable when
Enable is selected.
• Disable.
Register Username Enter the username for registration.
Register Password Enter the password for registration.
Cnonce Name Enter the cnonce name for handshake authentication.
Realm Name
Enter the realm name for handshake authentication.
IMPORTANT:
The realm name must be consistent with that configured on the server.
Otherwise, authentication will fail. If no realm name is configured, the device
trusts the realm name from the server.
Status
• Enable—Enables the access number.
• Disable—Disables the access number.
Configuring advanced settings for the access number
Select Voice Management > IVR Services > Access Number Management from the navigation
tree, and click the icon of the configured access number to access the following page.
Figure 791 Configuring advanced settings
For information about advanced settings, see "Advanced settings."
IVR configuration examples
Configure a secondary call on a call node (match the
terminator of numbers)
Network requirements
As shown in Figure 792, configure an IVR access number and call node functions on Router B to
meet the following requirements.
• After the subscriber dials 300 (the IVR access number) from Telephone A, Router B plays the
audio file welcome.wav.
To Next Page
Loading...
Need help?
General
