HPE FlexNetwork MSR Series User Manual

144
To clear all system logs in the log cache, click Reset. To refresh system logs, click Refresh. To
make the syslog display page refresh automatically, set the refresh interval on the syslog
configuration page. For more information, see "Setting buffer capacity and refresh interval."
Table 202
Sy
slog display items
Item Description
Time/Date Displays the time/date when the system log was generated.
Source Displays the module that generated the system log.
Level
Displays the severity level of the system log. The information is classified into
eight levels by severity:
• Emergency—The system is unusable.
• Alert—Action must be taken immediately.
• Critical—Critical condition.
• Error—Error condition.
• Warning—Warning condition.
• Notification—Normal but significant condition.
• Information—Informational messages.
• Debug—Debug-level messages.
Digest Displays the summary of the system log.
Description Displays the content of the system log.
Setting the log host
1. Select Other > Syslog from the navigation tree,
2. Click the Loghost tab to enter the log host configuration page, as shown in Figure 530.
Figure 530 Loghos
t configuration page

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English