199
Figure 213 DHCP Enable
Table 104 Configuration items
Item Description
DHCP Enable or disable DHCP globally.
Configuring DHCP interface setup
1. Select Advanced > DHCP Setup from the navigation tree.
2. Click the DHCP Interface Setup tab.
The DHCP interface setup configuration page appears, as shown in Figure 214.
Figure 214 DHCP inter
face setup
3. Configure the DHCP interface setup as described in Table 105.
4. Click Apply.
Table 105 Configuration items
Item Description
Interface Select an interface to be configured.
Type
Select a type for the interface, which can be:
• None—Upon receiving a DHCP request, the interface does not assign
an IP address to the requesting client nor serves as a DHCP relay agent
to forward the request.
• Server—Upon receiving a DHCP request, the interface assigns the
requesting client an IP address from the address pool.
• Relay—Upon receiving a DHCP request, the interface forwards the
request to an external DHCP server, which assigns an IP address for the
requesting client.
• Client—The interface uses DHCP to obtain an IP address.
DHCP server group
Correlate the relay agent interface with a DHCP server group.
You can correlate a DHCP server group with multiple interfaces. Make sure
that you have already added DHCP server groups for selection.
To Next Page
Loading...
Need help?
General
