FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
Copyright © Huawei Technologies Co., Ltd.
Figure 3-43 Installing an air director
----End
3.7.4 Installing an Outdoor Unit
3.7.4.1 Installation Requirements
Precautions
An outdoor unit must be installed by professionals. Incorrect installation will cause fire,
electric shocks, damage, and water leaks.
When a smart cooling product requires to be moved or reinstalled, ask for professionals.
Do not perform operations by yourself.
Do not store an outdoor unit in a damp basement or expose it in rain, because the
humidity will cause short circuits.
Environmental Requirements
To avoid fire disaster, install an outdoor unit in a dry and well-ventilated place without
flammable gas leakage.
Select a place away from direct sunshine and radiation from other heat sources. If the
sunshine or heat radiation cannot be avoided, cover the outdoor unit.
Do not install an outdoor unit in a place with much salt or corrosive gas.
When installing the outdoor unit, ensure that the air intake vent and air exhaust vent of
the condenser are not dirty or blocked. Install an outdoor unit in clean areas that are
away from residential areas.
At a high place with strong winds, install the outdoor unit against a wall to ensure the
normal operating of fans. Install baffle plates when necessary, take this measure to
prevent wind from blowing down the outdoor unit.
To Next Page
Loading...
Need help?
General