FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
Copyright © Huawei Technologies Co., Ltd.
3.7.4.3 Securing an Outdoor Unit
Prerequisites
The M10 expansion bolts used for securing an outdoor unit have been prepared.
The concrete groundwork is prepared.
Context
Move the outdoor unit close to the installation position before unpacking. You are
recommended to stand the outdoor unit during transportation. If tilt is not avoidable, the
tilt degree cannot exceed 15°.
Do not hold the fan guard on the shell. Otherwise, it will be deformed.
Do not touch the blades using hand or any other object.
Procedure
Step 1 Determine the four mounting holes of the outdoor unit based on the installation dimensions
and drill holes in the concrete base.
Step 2 Align the outdoor unit mounting holes with the holes in the concrete base, and secure the
outdoor unit to the concrete base using four M10 expansion bolts, as shown in Figure 3-49.
To Next Page
Loading...
Need help?
General