JUKI RS-1 User Manual

Maintenance Guide
6-2
6-2. Replacing the Ejector
1) Close the hand valve at the lower left portion of this main unit.
2) Disconnect the φ4 air tube  and φ6 air tube .
3) Disconnect the cable  of the CAL VCUM SV assembly.
4) Remove the mounting screws  (2 pcs.) and replace the CAL VCUM SV assembly.
5) Reassemble the components in the reverse order of disassembly.
When replacing the filter , it is not necessary to turn off the air.
Part No.: PF0100030A0 Part name: AIR SUCTION FILTER
Opened Closed
The air must be turned OFF.
3
2
4
1
5

JUKI RS-1 Specifications

General

Brand	JUKI
Model	RS-1
Category	Racks & Stands
Language	English