JUKI RS-1 User Manual

Maintenance Guide
19-1
DANGER
To prevent any trouble caused by accidental machine start,
always shut-down the air and
the power before starting the
maintenance and adjustment work.
19 Nozzle RFID READER
19-1 Changing the RFID READER/WRITER
1) Detach the chip box and the RFID READER cover.
2) Disconnect the USB cable connected to the board of the RFID READER/WRITER and
remove the tie-up band fixing the cable connecting the main unit and the board.
Chip box
RFID READER cover
Washer assembled hexagon socket
cap bolt M3 L=8, 2 locations
RFID READER/WRITER
main unit
Disconnect the USB cable.
Remove the
tie-up band.
Board of the RFID
READER/WRITER

JUKI RS-1 Specifications

General

Brand	JUKI
Model	RS-1
Category	Racks & Stands
Language	English