Maintenance Guide
8-7
8-1-5 Replacing the Inline Filter (Exchange Trolley Only)
∗ Start the work after the exchange trolley has been removed from the machine main unit.
1) Disconnect the air tube that is connected to the inline filter.
2) Detach the inline filter and replace the filter.
① Slide the whirl-stop in the direction indicated by an arrow to release the lock.
② Turn the cover 90° or more counterclockwise.
③ Remove the cover.
3) Reassemble the components in the reverse order of disassembly.
Inline filter
①
②
Lock released status
Whirl-stop
Case
Cover
To Next Page
Loading...
Need help?
General
