JUKI RS-1 User Manual

Maintenance Guide
1-34
1-6-2. Removing the X Ball Screw
(1) Loosen the coupling on the X motor
ball screw side.
(2) Loosen the set screw, remove the set screw and set piece, and loosen the lock nut.
∗ After the set screw has been removed, pay special attention so that the set piece is not
lost.
The set piece and lock nut are used as a set.
[Lock nut (Part No.: 40093876)]
(3) Detach the X ball screw frame assembly.
(4) Remove the screws that secure the X ball screw frame assembly.
Set piece
Wrench 17
Wrench 22
Remove SL6044092TN (2 pcs.).
Remove SL6042592TN (2 pcs.).
Remove SL6053092TN (2 pcs.).
X ball screw frame assembly
COUPLING_X_screw
COUPLING_X

JUKI RS-1 Specifications

General

Brand	JUKI
Model	RS-1
Category	Racks & Stands
Language	English