1-27
1-4-6. Wiring around the Head
Connect the cables coming from the XY veyor-cable (40182272) to the following locations. When
connecting the cables, do not bend any cable excessively nor apply any load. In particular,
carefully handle the fiber cables.
1) Insert the LNC-1, CN0601, CN0610, and CN0614 into the locations shown in the Figure
1-4-6-1.
2) Insert the ZTA-CNP1, ZTB-CNP1, and ZTC-CNP1 into the locations shown in the Figure
1-4-6-2.
3) Relay the SENS X at the location shown in the Figure 1-4-6-2. Secure the connectors and
cables.
Figure 1-4-6-1
Figure 1-4-6-2
To Next Page
Loading...
Need help?
General
