13 WIRING HARNESS, BATTERY 82
13.7 Changing the main fuse
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
– Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
Info
The main fuse protects all power consumers in the vehicle. It is in the housing of the starter relay next to the battery.
Preparatory work
– Switch off all power consumers and switch off the engine.
– Remove the seat. ( p. 59)
C00185-10
Main work
– Remove protection covers 1.
C00186-10
– Remove a defective main fuse 2 with needle nose pliers.
– Install a new main fuse.
Fuse (58011109130) ( p. 177)
Info
A reserve fuse 3 is located in the starter relay.
– Check the functioning of the electrical equipment.
– Mount the protection covers.
Finishing work
– Mount the seat. ( p. 60)
– Set the clock. ( p. 95)
13.8 Changing fuses of individual power consumers
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Preparatory work
– Switch off all power consumers and switch off the engine.
– Remove the seat. ( p. 59)
C00185-11
Main work
– Open fuse box cover 1.
To Next Page
Loading...
Need help?
General
