Revision:1.0(2023-01-12)
125
Item Description Remarks
Locking
threshold
Specifies the maximum number of
consecutive times that a user can enter a
wrong password. If this threshold is
exceeded, the corresponding account will
be locked.
For example, the locking
threshold is set to 5, time for
resetting locking threshold to
60 minutes, and locking
period to 60 minutes. If the
user enters a wrong password
for more than 5 consecutive
times within 60 minutes, the
user will be locked for 60
minutes. During the locking
period, the locked user cannot
log in but other users can log
in properly.
Time for
resetting
locking
threshold
Specifies the duration that a user can
enter a wrong password repeatedly.
Locking period Specifies the user locking period.
Clear locking Clears all locking information. /
Enable strong
password
Enhances password security by enabling
strong password.
• When a user created before this item
is selected logs in, the system will
prompt whether the current user
password complies with the security
policy.
The administrator can reset operator
passwords or administrator passwords
in Access Control.
If the password of a user created after this
item is selected does not comply with the
security policy, the system will prompt the
user to modify the password.
/
7)LDAP permission management
Before assigning permissions through the LDAP server, log in as the system administrator.
Tap LDAP Config.
Item Description
Server Address After connecting to the network, enter the server address in the
Server Address editing box.
Test LDAP Server Verify whether the server functions properly. If the server passes
the test, the prompt Server test successful is displayed.
Root DN The root DN is automatically displayed upon server test success.
Diagnostic Ultrasound System
Service Manual
3 Installation
To Next Page
Loading...
Need help?
General
