Revision:1.0(2023-01-12)
171
When the self-test program is running, the self-test software version is displayed in the upper
left corner on the status bar: Version of the self-test software in TEX customer service mode: xx
Release date: xxxx-xx-xx During testing, the software version information in the status bar
changes to the name of the current test item. The status bar shows both the test progress of
the current test item and the overall test progress. In addition, a warning message appears in
red on the status bar "Warning: Make sure AC connect to machine on self-test or maybe
shutdown automatically!"
Beyond that, the status bar shows the remaining time of the test.
Figure5–5 Test status bar
6. Monitoring information bar
The monitoring information bar shows the current time, CPU usage, memory usage, CPU
temperature, and FGPA junction temperature in real time. The value ranges of the CPU
temperature and FPGA junction temperature are displayed in white.
When the temperature exceeds the working temperature, the temperature color in the status
bar will be displayed in red.
7. System structure diagram
During the test, the elements in the system structure diagram will change colors according to
the test results. If the test fails, the related element is displayed in orange. If the test succeeds,
the related element is displayed in green. If the color does not change, the element is not
tested.
8. Test information
When the test is complete, the test result for that test item is displayed. The test result is
marked as PASS in green for a passed sub-test item, and as FAIL in red for a failed sub-test
item. If a test item is not performed, it is marked as Skip in gray. If the board or component is
not in position, the test item is marked as NaN in gray. If an error occurs during the test, the test
item is marked as Error in red. For a parent test item, the test result is a summary of the test
results of the selected child test items. If there are failed test items among the selected child
test items, the test result of the parent test item is FAIL. The test result of the parent test item is
PASS only if the test results of all selected child test items are PASS. See the figure below.
Diagnostic Ultrasound System
Service Manual
5 Maintenance
To Next Page
Loading...
Need help?
General
