Panasonic KX-NS500 Features Guide

2.5.2 Automatic Extension Release
Description
After going off-hook, if an extension user fails to dial any digits within a preprogrammed time period, the user
will
hear a reorder tone. This operation applies to intercom calls only. This feature is also known as Automatic
Station Release.
Conditions
• A PT/PS user hears a reorder tone for a preprogrammed time period, and then the PT/PS returns to idle
status automatically. However, an SLT user hears a reorder tone until he goes on-hook.
• This feature works in one of the following cases:
When making an intercom call
a. If the first digit is not dialled within a preprogrammed time period.
b. After a digit is dialled, if subsequent digits are not dialled within a preprogrammed time period.
PC Programming Manual References
6.14 Tool—UT Option Setting
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone
→
Dial—Extension First Digit (s)
→ Dial—Extension Inter-digit (s)
→ Tone Length—Reorder Tone for PT Handset (s)
→ Tone Length—Reorder Tone for PT Hands-free (s)
Feature Guide 101
2.5.2 Automatic Extension Release

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm