2.10.4.2 Call Waiting Tone
Description
When an extension user attempts to call a busy extension (ringing or having a conversation), the Call Waiting
tone can be sent to the called extension to let him know another call is waiting.
Conditions
• This feature only works if the called extension has activated Call Waiting. If it is activated, the calling
extension will hear a ringback tone.
• Call Waiting tone can be selected (Tone 1 or Tone 2) through personal programming (Call Waiting Tone
Type Selection).
• When the headset mode is on, you can choose whether the call waiting tone is heard from the speaker
phone of the telephone or the earpiece of the headset. However, this setting is only available for terminals
that support call waiting tone path switching (KX-DT521, KX-DT543, KX-DT546, KX-NT553, and
KX-NT556).
PC Programming Manual References
9.14 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-IPEXT—Option—
C.Waiting with
Headset
9.22 PBX Configuration
—[1-1] Configuration—Slot—Port Property—Extension Type—
C.Waiting with
Headset
10.3 PBX Configuration
—[2-3] System—Timers & Counters—Miscellaneous—
Caller ID—Visual Caller ID
Display (s)
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan
—B/NA DND Call Feature
→
BSS / OHCA / Whisper OHCA / DND Override
→ BSS / OHCA / Whisper OHCA / DND Override-2
12.1.1 PBX Configuration—[4-1-1] Extension
—Wired Extension—Extension Settings
→Option 2—
Manual C. Waiting for Extension Call
→Option 2— Automatic C. Waiting
→Option 4— Call Waiting Tone Type
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings
→Option 2—
Manual C. Waiting for Extension Call
→Option 2— Automatic C. Waiting
→Option 4— Call Waiting Tone Type
User Manual References
1.9.3 Receiving Call Waiting
(Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)
3.1.2 Settings on the Programming Mode
164 Feature Guide
2.10.4 Second Call Notification to Busy Extension
To Next Page
Loading...
Need help?
General
