5.1.3 Tenant Service
Description
This PBX can be shared with a certain number of tenants.
1. Tenant Configuration
Tenant Member
The
tenant members consist of extension user groups. One extension user group can belong to only one
tenant. Therefore, one extension can belong to only one tenant.
(® 5.1.2 Group)
Time Service
Each tenant has a Time Table. The Start and/or End time of each time mode (day/lunch/break/night) can
be set for each day of the week. The Time Table numbers correspond to the tenant numbers respectively.
(® 5.1.4 Time Service)
[Example]
Tenant 1
Use Time Table 1
Extension
User Group 1
Extension
User Group 2
Extension
User Group 3
Extension
User Group 4
Tenant 2
Use Time Table 2
Extension
User Group 5
Extension
User Group 6
2. System Management
Each of the following system management items can be assigned to each tenant.
a. Tenant Operator (extension number/floating extension number of incoming call distribution group/
none) (® 5.1.5 Operator Features)
® 14.6 PBX Configuration—[6-6] Feature—Tenant
—
Operator (Extension Number)
b. ARS Mode (Off/Local Access/All Access/System) (® 2.8.1 Automatic Route Selection (ARS))
® 14.6 PBX Configuration—[6-6] Feature—Tenant
—
ARS Mode
c. Music Source for Music on Hold (System/BGM Number/Tone)
(® 2.13.4 Music on Hold)
® 14.6 PBX Configuration—[6-6] Feature—Tenant—
Music On Hold
d. System Speed Dialling
(System/Tenant Exclusive)
(® 2.6.4 Speed Dialling—Personal/System)
® 14.6 PBX Configuration—[6-6] Feature—Tenant—
System Speed Dial
[Programming Example]
Tenant No. Operator ARS Mode Music Source System Speed Dialling
1 Extn.101 Local Access System
*3
System
*4
2 None
*1
System
*2
Tone
Extended/
Tenant Exclusive
3
Floating extn. no.
200
Off BGM1
Extended/
Tenant Exclusive
Feature Guide 473
5.1.3 Tenant Service
To Next Page
Loading...
Need help?
General
