2.24.2 Extension Feature Clear
Description
Extension users can clear all the following features set on their own telephone at once. This feature is also
known as Station Programme Clear.
Features After Setting
Absent Message Off
BGM Off
FWD*/DND* Off
Call Pickup Deny Allow
Call Waiting* Disable (In
Canada, the default setting is "Enable" [Call
Waiting tone].)
Data Line Security Off
Executive Busy Override Deny Allow
Log-in/Log-out Log-in
Message Waiting All messages left by other extensions will be
cleared.
Paging Deny Allow
Parallelled Telephone Paired SLT will ring
Hot Line* Off
Timed Reminder Cleared
Note
The features with "*" can be programmed not to be cancelled by this feature.
Conditions
• Extension
Dial Lock (® 2.7.3 Extension Dial Lock) and the extension personal identification number (PIN)
(® 2.24.1 Extension Personal Identification Number (PIN)) will not be cleared by this feature.
• For Users in Canada only
If dial tone 2 is heard after Extension Feature Clear:
After performing Extension Feature Clear, Call Waiting will be enabled if "Extension Clear: Call
Waiting" is set to "Clear" through system programming. In this case, dial tone 2 will be heard when going
off-hook. (® 2.25.1 Dial Tone)
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Extension Feature Clear
10.9 PBX Configuration
—[2-9] System—System Options—Option 2
→
Extension Clear—Call Waiting
→ Extension Clear—Fwd/DND
→ Extension Clear—Hot Line (Pick-up Dial)
Feature Guide 283
2.24.2 Extension Feature Clear
To Next Page
Loading...
Need help?
General
