2.5.4.2 Emergency Call
Description
An extension user can dial the preprogrammed emergency numbers after seizing a trunk regardless of the
restrictions imposed on the extension.
Conditions
• A specified number of emergency numbers can be stored (some may have default values).
• Emergency numbers may be called even when:
– in Account Code—Forced mode (® 2.5.4.3 Account Code Entry)
– in any TRS/Barring levels (® 2.7.1 Toll Restriction (TRS)/Call Barring (Barring))
– after the preprogrammed call charge limit is reached (® 2.7.2 Budget Management)
– in Extension Dial Lock (® 2.7.3 Extension Dial Lock)
• CLIP Number Notification
When dialling an emergency number, the preassigned CLIP number for the extension will be sent as a
location identification number. (® 4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/
COLP))
• The CLIP number assigned to the extension will be sent regardless of the settings such as CLIR or CLIP
number assigned to an ISDN port to be used. This feature is only available when using a PRI (PRI23) line
with E911-compatible services.
PC Programming Manual References
15.4 PBX Configuration—[7-4] TRS—Emergency Dial
PT Programming Manual References
[304] Emergency Number
Feature Guide References
6.1 Capacity of System Resources
Feature Guide 105
2.5.4 Trunk Call Features
To Next Page
Loading...
Need help?
General
