EasyManuals Logo

Panasonic KX-NS500 Features Guide

Panasonic KX-NS500
580 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #171 background imageLoading...
Page #171 background image
2.11.4 Headset Operation
Description
This PBX allows the use of headset-compatible PTs. A PT user can talk to another party without lifting the
handset. This feature is also known as Handset/Headset Selection.
For connection and operation, refer to the Operating Instructions for the headset.
Conditions
Hardware Requirement: An optional headset
If headset mode is on, pressing the SP-PHONE button activates the headset, not the built
-in speaker.
To set headset mode on a DPT or IP-PT, use personal programming (Headset Operation) or press the
Headset button. To set headset mode on an APT, use the handset/headset selector provided on the set
and/or on the headset.
Headset Button
A flexible button on a DPT or IP-PT can be customised as a Headset button. It is possible to assign a
Headset button to a flexible button on an APT, but the button will not function.
Answer/Release Button
A flexible button can be customised as an Answer button or a Release button. Such buttons are useful for
headset operation. It is possible to answer an incoming call by pressing an Answer button. While hearing
the Call Waiting tone during a conversation, pressing an Answer button enables one to answer the second
call by placing the current call on hold. Pressing a Release button enables one to disconnect the line during
or after conversation, or to complete a Call Transfer.
It is possible to switch from headset mode to hands-free mode or vice versa during a conversation by
pressing the Headset button.
Headset users cannot use the following features:
Automatic Redial (® 2.6.3 Last Number Redial)
Receiving OHCA
Receiving Whisper OHCA (® 2.10.4.4 Whisper OHCA)
PC Programming Manual References
9.14 PBX Configuration—[1-1] Configuration—Slot—Port PropertyV-IPEXT—Option—
Headset OFF/ON
9.22 PBX Configuration
—[1-1] Configuration—Slot—Port Property—Extension Type—
Headset OFF/ON
12.1.4 PBX Configuration—[4-1-4] Extension
—Wired Extension—Flexible Button—
Type
12.3 PBX Configuration
—[4-3] Extension—DSS Console—
Type
Feature Guide References
2.21.2 Flexible Buttons
User Manual References
1.3.5 Using the ANSWER/RELEASE Button
1.4.8 Using the Headset (Headset Operation)
3.1.2 Settings on the Programming Mode
Feature Guide 171
2.11.4 Headset Operation

Table of Contents

Other manuals for Panasonic KX-NS500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic KX-NS500 and is the answer not in the manual?

Panasonic KX-NS500 Specifications

General IconGeneral
Analog ExtensionsUp to 64
VoIP SupportYes
System TypeHybrid IP-PBX
Power SupplyAC 100-240V, 50/60Hz
Operating Temperature0°C to 40°C
Humidity10% to 90% (non-condensing)
Maximum Extensions288
IP Extensions128
VoIP Channels64
SIP Trunks64
NetworkingYes, supports networking
Built-in ApplicationsCall Center
ExpandabilityYes, via expansion cards and cabinets
Supported ProtocolsSIP, H.323, MGCP
Dimensions430 x 88 x 367 mm

Related product manuals