Feature Guide References
5.4.1 E-mail Notification for Extension Users
User Manual References
Subscriber Operation
1.8.6 Other Features— Message Waiting Notification
→Device Notification:
→To turn Device Notification On/Off
3.2.1.29 Message Waiting Notification—Lamp
Description
Automatically lights the message waiting lamp on the subscriber
’s telephone when subscribers have new
messages. When a proprietary telephone with display is used, the number of unplayed messages will be
displayed when the message waiting lamp is lit. When the Message button light turns on, pressing the button
allows the subscriber to play back the messages stored in his mailbox without dialling a mailbox number.
Conditions
• In order to display the number of unplayed messages on the display:
– A compatible Panasonic Proprietary Telephone with 6-line display must be used.
– The subscriber must have his or her own extension.
– The Message Manager’s extension number must be assigned as Operator 1 in Day Mode.
• Extensions assigned as operators can be called by dialling [0], however, when setting this feature the
extension number (not "0") must be specified.
PC Programming Manual References
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Notification Parameters—
Message Waiting
Lamp
User Manual References
Subscriber Operation
1.8.6 Other Features— Message Waiting Notification
Manager Operation
2.2.2 Message Manager Features
—
Setting Up Message Waiting Notification
3.2.1.30 Message Waiting Notification—Telephone Device
Description
Automatically calls a preprogrammed telephone number when a subscriber has new messages
(voice). New
messages will be automatically played back when the subscriber answers the call.
Notifications can be scheduled. The System Administrator can program 2 different time frames (for example,
9 AM to 12 PM and 8 PM to 10 PM) independently for each day of the week. Message waiting notifications will
346 Feature Guide
3.2.1 System Features
To Next Page
Loading...
Need help?
General
