Panasonic KX-NS500 Features Guide

2.1.3 Incoming Call Indication Features
2.1.3.1 Incoming Call Indication Features
—SUMMARY
Description
Incoming calls are indicated by various methods as follows:
Type Feature Description & Reference
Ring Tone Ring Tone Pattern
Selection
A telephone rings when receiving a call. The ring
tone patterns can be changed for each incoming
call type.
® 2.1.3.2 Ring Tone Pattern Selection
Voice-calling Alternate
Receiving—Ring/
Voice
A PT user can select to receive intercom calls by
ring tone or by voice, through personal
programming.
® 2.5.3 Intercom Call
LED
(Light Emitting Diode)
LED Indication The light shows line conditions with a variety of light
patterns.
® 2.21.3 LED Indication
Display (Caller’s
Information)
Display Information The display shows the caller’s information.
® 2.21.4 Display Information
External Pager Trunk Answer from
Any Station (TAFAS)
The external pager sends a ring tone when
receiving a call.
®
2.17.2 Trunk Answer From Any Station (TAFAS)
Tone/Voice during a
Conversation
Call Waiting A busy extension hears a tone, or voice from the
handset/built-in speaker indicating that another
incoming call is waiting.
® 2.1.3.3 Call Waiting
Feature Guide 43
2.1.3 Incoming Call Indication Features

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm