2.22.2 Printing Message
Description
An
extension user can select a message to be output on SMDR. Up to eight messages can be preprogrammed
in the Printing Message table, and are available to all extensions connected to the PBX. A message can contain
the "%" symbol, which requires a number to be entered in its place when the message is selected at an
extension.
Depending on the content of the preprogrammed messages, this feature can be used to record a variety of
information, which can be output on SMDR to, for example, a connected PC.
[Example]
If message 1 is preprogrammed as "Started work", and message 2 as "Finished work", employees can sign in
by selecting message 1 when starting work, and sign out by selecting message 2 when finishing. A connected
PC can then be used to generate employee work records.
Conditions
• Up to seven "%"s can be stored for each message.
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Printing Message
14.2 PBX Configuration
—[6-2] Feature—Hotel & Charge—Main—
SMDR for External Hotel Application
2—Printing Message 1
–8
Feature Guide References
2.22.1.1 Station Message Detail Recording (SMDR)
6.1 Capacity of System Resources
User Manual References
1.12.1 Using the Telephones in a Hotel-type Environment (Hospitality Features)
270 Feature Guide
2.22.2 Printing Message
To Next Page
Loading...
Need help?
General
