Parker Hannifin
Product Type................. ACR9000 Series Controllers, including ACR9030 and
ACR9040
The above product complies with the requirements of directives:
• EMC Directive 89/336/EEC
• Low Voltage Directive 73/23/EEC
• CE Marking Directive 93/68/EEC.
Provided the installation requirements described in this guide are met, and
there are no special requirements of the installation and operating
environment so that the application may be considered typical.
The above equipment conforms with the protection requirements of Council
Directive 89/336/EEC as amended by Directive 92/31/EEC on the
approximation of the laws of the Member States relating to Electromagnetic
Compatibility when installed, operated and maintained as intended. Also, the
above equipment conforms with the requirements of Council Directive
73/23/EEC (Low Voltage Directive) as amended by Directive 93/68/EEC (CE
Marking Directive), when installed, operated, and maintained as intended.
In accordance with IEC 61800-3:1997 (Adjustable speed electrical power
drive systems) this product is of the restricted sales distribution class which
meets the needs of an industrial environment when installed as directed.
However, further measures may need to be taken for use of the product in a
domestic environment.
The installation requirements are detailed in the Information supplied with the
equipment. The equipment is sold only to competent system builders.
Compliance is demonstrated by the application of the following standards:
• BS EN 50081-2 (1994) Electromagnetic compatibility—Generic
emission standard Part 2. Industrial Environment.
• BS EN 61000-6-2 (1999) Electromagnetic compatibility Part 6-2:
Generic Standards – Immunity for industrial environments.
• BS EN 61010-1 (1993) including Amendment A2. Safety requirements
for electrical equipment for measurement, control, and laboratory use.
Part 1 General Requirements.
ACR9000 Series Hardware Installation Guide 9
www.comoso.com
To Next Page
Loading...
Need help?
General
