PerkinElmer CLARUS 680 GC User Manual

Clarus 600/680 User’s Guide
3-55
• When the GC oven starts to program, the Start Out signal will be asserted for 1
second.
• The Ready Out signal will be asserted only when the GC is fully equilibrated and the
GC has reached full Ready status.
Stop Button
As soon as the Start button is touched, the Stop button appears on all top level screens.
Touching the Stop button before the system is running prompts the following dialog box:
Touch OK to cancel the run.
The status bar reflects that the system is running and the Start button changes to Stop.

PerkinElmer CLARUS 680 GC Specifications

General

Brand	PerkinElmer
Model	CLARUS 680 GC
Category	Laboratory Equipment
Language	English