PerkinElmer CLARUS 680 GC User Manual

Clarus 600/680 User’s Guide
4-61
8. When all the settings are appropriate for your analysis touch OK.
The FPD tab screen will be now visible and the changes you made in the
configuration screen will be shown.
Set the FPD Temperature
NOTE: When using the FPD with Turbochrom Version 3.1 or earlier, OMEGA, or the
Model 1020/1022 (software Version 7.10 for the SX or Version 6.5 for GC Plus), the
FPD temperature values must be entered between 250 °C and 450 °C only. Do not
enter any value less than 250 °C.
1. From the System Status screen touch the FPD button.
2. The FPD tab page is now visible.

PerkinElmer CLARUS 680 GC Specifications

General

Brand	PerkinElmer
Model	CLARUS 680 GC
Category	Laboratory Equipment
Language	English