PerkinElmer CLARUS 680 GC User Manual

Clarus 600/680 GC User’s Guide
1-3
About This Manual
This guide is divided into following chapters:
Chapter 1 Introduction
This chapter contains a brief introduction to the Clarus GC, the conventions and
warnings used in the manual.
Chapter 2 Touch Screen Navigation
This chapter contains information that introduces you to the look and feel of the
touch screen. It shows you how to turn on the GC, check the status, and perform
fundamental operations such as changing parameters, selecting options, using the
tools menus, etc.
Chapter 3 Active Method
This chapter contains step by step explanation of the active method. Detailed
information on setting up the autosampler is contained in this chapter.
Chapter 4 Setting Up the Detectors
This chapter contains detailed information on setting up the detectors.
Chapter 5 Using the Method Editor
This chapter describes how to modify, save and use the method editor.
Chapter 6 Using the Tools Menu
The chapter contains detailed information on the tools menu section of the touch
screen.
Chapter 7 Setting Up a Typical Analysis
This chapter describes how to run a typical analysis on the Clarus GC using the
most common configuration.

PerkinElmer CLARUS 680 GC Specifications

General

Brand	PerkinElmer
Model	CLARUS 680 GC
Category	Laboratory Equipment
Language	English