PerkinElmer CLARUS 680 GC User Manual

Setting up a Typical Analysis
7-16
Detector
Thermal Conductivity Detector (TCD)
1. Touch the TCD button on the Status Screen to display the TCD tab.
2. To program the temperature in the TCD tab touch the Temperature field
and it will go black. Then use the up and down arrow or keypad
buttons to get to the required temperature for your
application.
3. Repeat the same procedure for the Attn (attenuation) and Current. As
shown in the example below, this analysis has the heater off.

PerkinElmer CLARUS 680 GC Specifications

General

Brand	PerkinElmer
Model	CLARUS 680 GC
Category	Laboratory Equipment
Language	English