PerkinElmer CLARUS 680 GC User Manual

Touch Screen Navigation
2-8
Run Button
The Run button displays the Manual injection and Autosampler settings if the
device is enabled. The bottom bar on these screens includes the Start button.
When the system is running, the Start button changes to the Stop button. Since
the Start button is only available on the Autosampler and Manual inject screens,
you must initiate a run from these screens. However, when the system is running,
the Stop button appears on all screens allowing you to Stop the run from
anywhere in the application. If the system is Paused, the Resume button appears
on all screens.
Autosampler Enabled
When an Autosampler is enabled, the Run button defaults to that screen. The
following screens show the enable check box on the configuration screen and the
associated Autosampler screen in the Active Method.

PerkinElmer CLARUS 680 GC Specifications

General

Brand	PerkinElmer
Model	CLARUS 680 GC
Category	Laboratory Equipment
Language	English