PerkinElmer CLARUS 680 GC User Manual

Clarus 600/680 User’s Guide
4-93
Autozeroing a Detector
Each configured detector is equipped with digital autozeroing capability. As long as
Autozero is On (indicated by a check mark in the box), the system will autozero the
detector to the offset specified during configuration whenever the system becomes
READY or when a run is started.
The example below uses the ECD detector but the following procedure can also all
the detectors.
1. In the System Status screen touch the ECD button.
2. In the ECD Tab you will see the AutoZero field
. To turn on the
AutoZero touch the field and a check mark will appear.

PerkinElmer CLARUS 680 GC Specifications

General

Brand	PerkinElmer
Model	CLARUS 680 GC
Category	Laboratory Equipment
Language	English