PerkinElmer CLARUS 680 GC User Manual

Clarus 600/680 User’s Guide
3-23
Setting Carrier Gas Pressure
To view or set the carrier pressure:
1. From the System Status screen touch the corresponding Injector button (A or B)
for which you want to set the carrier pressure. The injector screen appears.
In this example, the Clarus GC is configured with the PSS capillary mode on for
pressure (psi). If the option for capillary control has been selected during
configuration, you can program the carrier gas according to one of three values:
pressure, velocity, or flow. The carrier gas field on the injector tab screen
displays the set point value. The label below the field displays the current step.
The actual values for all the available configuration options are displayed to the
left as read only text on the screen.
2. Touch the program button
for Carrier Gas.
The Carrier Pressure Program window appears:

PerkinElmer CLARUS 680 GC Specifications

General

Brand	PerkinElmer
Model	CLARUS 680 GC
Category	Laboratory Equipment
Language	English