Philips Pathology Scanner SG20 - Troubleshooting Procedures

Troubleshooting procedures Troubleshooting
73
4522 207 12671 * 2021-06-17
Pathology Scanner SG20 / SG60 / SG300
Troubleshooting procedures
CAUTION
Discharge of static electricity can cause damage to the scanner.
Use an antistatic wristband connected to the ESD bonding point when opening the
maintenance door or handler door to avoid discharge of static electricity.
CAUTION
Broken glass can cause damage to the scanner.
Do not use the scanner until you are sure that the broken slide has been removed
completely from the scanner.
CAUTION
Dirt can cause damage to the camera lens.
Do not touch the camera lens.
CAUTION
The rulers are sensitive and may not work properly if touched.
Do not touch the rulers.
NOTICE
The grippers motors might be hot.
Shut down the scanner before removing a slide from a gripper.