Philips Pathology Scanner SG20 User Manual

Equipment ratings Technical data
97
4522 207 12671 * 2021-06-17
Pathology Scanner SG20 / SG60 / SG300
NOTICE
The scanner must be installed in a clean environment. Prevent accumulation of dust and wax
particles inside the scanner as this can interfere with the scanning process.
Condition Value
Temperature -20 to 60 °C
Temperature change rate ≤ 1 °C/minute
Relative humidity (condensation possible) 5 - 95 %
Vibration Frequency: 10 - 150 Hz
Amplitude: ≤ 1.5 mm
Shock (on the package)
- g-value
- pulse duration
≤ 150 m/s
2
≤ 11 ms
Tab. 33: Environmental conditions: Transport and storage of packaged system
Equipment ratings
Definition Classification
Isolation Classification Class 1
Ingress Protection code IP 21
Tab. 34: Equipment ratings
Explanation of the Ingress Protection code:
• First digit indicates that the equipment is protected against solid objects over 12.5 mm e.g.
hands, large tools.
• Second digit indicates that the equipment is protected against vertically falling drops of
water or condensation.
Scanspeed and tissue coverage
Definition Specification
SG20 SG60 SG300
Scanning time of a slide (excluding handling and pre-
scan) with a benchmark scan area of 15 mm x 15 mm
with a resolution equivalent to a 40x magnification ob-
jective with a numerical aperture of 0.75.
≤ 101 seconds
(calculated)
≤ 43 seconds ≤ 43 seconds
Scanning time of a slide (including handling and pre-
scan) with a benchmark scan area of 15 mm x 15 mm
with a resolution equivalent to a 40x magnification ob-
jective with a numerical aperture of 0.75.
≤ 120 seconds ≤ 62 seconds ≤ 62 seconds
Tab. 35: Scanspeed

Philips Pathology Scanner SG20 Specifications

General

Brand	Philips
Model	Pathology Scanner SG20
Category	Laboratory Equipment
Language	English