RL78/G10 CHAPTER 24 ELECTRICAL SPECIFICATIONS
R01UH0384EJ0311 Rev. 3.11 586
Dec 22, 2016
24.1 Absolute Maximum Ratings
(TA = 25°C)
Parameter Symbols Conditions Ratings Unit
Supply Voltage VDD −0.5 to +6.5 V
Input Voltage VI1 −0.3 to VDD + 0.3
Note
V
Output Voltage VO1 −0.3 to VDD + 0.3 V
Output current, high IOH1 Per pin −40 mA
Total of all pins P40, P41 −70 mA
P00 to P07 −100 mA
Output current, low IOL1 Per pin 40 mA
Total of all pins P40, P41 70 mA
P00 to P07 100 mA
Operating ambient
temperature
T
A −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Note Must be 6.5 V or lower.
Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any
parameter. That is, the absolute maximum ratings are rated values at which the product is on the
verge of suffering physical damage, and therefore the product must be used under conditions that
ensure that the absolute maximum ratings are not exceeded.
Remarks 1. Unless specified otherwise, the characteristics of alternate-function pins are the same as those of the port
pins.
2. The reference voltage is V
SS.
To Next Page
Loading...
Need help?
General
