Ricoh Aficio SP C311N User Manual

91
8. Special Operations under
Windows
Printing Files Directly from Windows
You can print files directly using Windows commands; "lpr" or "ftp".
Setup
Use the following procedure to make network environment settings.
A Enable TCP/IP using the control panel, and then set up the printer’s net-
work environment about TCP/IP including IP addresses.
TCP/IP of the printer is set as default.
B Install a TCP/IP in Windows to set up the network environment.
Consult the network administrator for the local setting information.
C To print, install “Printing service for UNIX” as the network application.
Reference
For details about setting up IPv4 address, see Hardware Guide.
For details about setting the IPv4 address of the printer using DHCP, see
p.114 “Using DHCP”.
This completes the setup for specifying a printer using an IPv4 address
when printing. When using a host name to specify a printer, proceed to
p.92 “Using a Host Name Instead of an IPv4 Address” and continue the
setup.

Ricoh Aficio SP C311N Specifications

Printing

resolution	600 x 600 dpi (default), 1200 x 600 dpi, 2400 x 600 dpi
printing speed	26 ppm (Letter)
first print speed	13.5 sec. or less

Paper Handling

standard paper capacity	500 sheets
bypass tray capacity	100 sheets
maximum paper capacity	Up to 1, 100 sheets

Power

power source	120V, 60Hz
maximum power consumption	1300W or less
energy saver power consumption	15W or less

Weight and Dimensions

dimensions	15.8" x 15.2" x 18.9" (400 mm x 387 mm x 480 mm)
weight	61.73 lb. (28.0 kg)