Rockwell Automation Allen-Bradley Kinetix 5500 Series User Manual

Rockwell Automation Publication 2198-UM001D-EN-P - May 2014 211
Upgrade the Drive Firmware Appendix B
Verify the Firmware Upgrade
Follow these steps to verify your firmware upgrade was successful.
1. Open your RSLinx software.
2. From the Communications menu, choose RSWho.
3. Expand your Ethernet node, Logix backplane, and EtherNet/IP network
module.
4. Right-click the drive module and choose Device Properties.
The Device Properties dialog box appears.
5. Verify the new firmware revision level.
6. Click Close.
TIP
Verifying the firmware upgrade is optional.

Rockwell Automation Allen-Bradley Kinetix 5500 Series Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley Kinetix 5500 Series
Category	Servo Drives
Language	English