Chapter
1
Operation
Procedures
12. Setting the Impression Pressure Adjustment Dial
Set the impression pressure adjustment dial
to
match
the paper thickness.
The
impression
pressure
may
slightly
differ
depending on the surface
of
the paper and the
condition
of
the blanket, therefore
adjust
the
impression pressure based on the printed material.
«NOTICE»
If
printing with the dial scale
set
to a
paper
thickness less than the thickness
of
the paper
being printed, the blanket
and
press
will be
damaged.
Setting the Delivery Section Auxiliary Switch Panel
1)
Set the each detector switch.
q,~£
888~
~
008~
0
!o-0
DDB~
!.ere~s:.wittioufsemlat.Jto·mall¢Plat~~6?o9~~~
Set the paper feed break detector switch (2)
at
the
rn
position.
(Reference) When turning ON the press power, the
paper feed jam detector switch (1),
electronic type double sheet detector
switch (3), and blanket jam detector
switch ( 4) will operate automatically.
(Fail-safe function)
«NOTICE»
If
printing with
the
switches
(1)
through
(4)
turned
OFF,
the
press may be damaged.
l!7re~·s{\Vit6'$e·rn,·at1lom·anq:f<Rlaf~;off?og·~r;tl
Set the paper feed break detector switch ( 4) at
the
rn
position.
(Reference) When turning ON the press power, the
blanket jam detector button (1), paper
feed
jam
detector
button
(2), and
electronic type double sheet detector
button (3) will operate automatically.
(Fail-safe function)
«NOTICE»
If
printing with the buttons
(1)
through
(3)
turned
OFF,
and the switch
(4)
at
theiQ]
position, the
press may be damaged.
Operation Edition - 43
To Next Page
Loading...
Need help?
General
