Ryobi 3302H User Manual

Precautions When Operating
£wARNING
Preparation and procedures if an emergency happens!
• If finding poor operation of any safety cover, switch, and the other safety devices while running the press,
immediately stop the press and consult the dealer who you purchased the press from.
• If noticing a noise or offensive smell (burnt motor smell) while running the press, stop the press as soon as
possible and follow the steps below.
1. Turn off the power and pull out the power cord plug from the outlet.
2. If needing to rotate the press, do it manually by using the handwheel.
3. Consult the dealer who you purchased the press from.
• Prepare a fire extinguisher to extinguish any possible fire in the press. Keep it at a place that is readily accessible
and easy to use.
Fire extinguisher type
When a fire occurs in the press or around the
press area, use an all purpose type fire
extinguisher. (This type should be able to handle
wood, paper, and fiber fires; grease and
flammable liquids fires; and electrical component
fires.)
Cautions for clothes!
Never wear clothes or jewelry that may get easily
caught in the press when operating the press. Set the
long hair so that it does not get caught
in the press
and wear a cap.
Failure to follow this instruction may result in a serious
injury.
Safety Operation Edition - 1 0
Mount the covers and safety devices
properly!
Never alter the safety devices!
Mount the covers removed to do the maintenance, for
example lubrication,
in place and run the press.
Never remove or alter any safety device mounted on
the press.
Failure to follow this instruction may result in a serious
injury.

Ryobi 3302H Specifications

General

Brand	Ryobi
Model	3302H
Category	Power Tool
Language	English