Chapter
4 Precautions When Operating
A CAUTION
Stop the press before doing the setting
around the rotating parts!
(in the feeder section)
Stop the press before doing the setting of the parts,
such as the suction feet and sheet separator bracket
around the rotating parts.
Failure
to
follow
this
instruction may result
in
an
injury.
Safety Operation Edition - 14
Stop the press before doing the setting
around the rotating parts!
(on the feeder board)
Stop the press before doing the setting of the parts,
such as the mechanical type double sheet detector,
pull-out roller, guide roller, retainer, board tape, and
push side guide
on
the feeder board.
Failure
to
follow
this
instruction may result
in
an
injury.
To Next Page
Loading...
Need help?
General
