Chapter
1 RYOBI PCS-F
I 4. Reading
and
Presetting the
Ink
Fountain Key Opening Volume
Data
I
The data read from the floppy disk will be presetted
to
move the ink fountain keys.
IO
8-'"o_E_-;:::11======2=====3======4===A
=:5======6====:7====:
0
=:8~~
~§~
UNITDA D D D D D D . K L M
F
1;
~:L--~-~-~--~-:--~-:--~-:--~-
0
--~--~---J
~~~
1 2 3
~~
_o~_oc_K_G~~L~~=sc~o_j~I=======P======='~'~~YE~s-Q~~=No~~~:--~_=~
1.
Check that each button (H through M) on the ink fountain preset panel, ink fountain key 0 point reset button (E), and
lock button (G) are OFF.
2. Insert the floppy disk with the saved data and push the data reading button (M).
SELECT
DATA
AND PRESS YES KEY
•
l
2 3 4
IL__
______
The
job
No.
of
the saved data is indicated.
For example, the job No. from 1 to 4 is inputted.
3. Move the cursor by using
the~
or 8 button
of
the number input buttons (N). After selecting the data you want to
read, push
the~
button. For example, select the job No.
2.
2 READING COMPLETE. START OK?
YES OR NO
4.
Push
the~
button.
5. The unit selection button
(F) lamp will light in order and preset the ink fountain key opening volume on each unit to
the data read.
During presetting, the following message is indicated on the message display (P).
SETIING
NO.* UNIT INK KEY
Optional Accessories Edition - 12
To Next Page
Loading...
Need help?
General
