Chapter 1 RYOBI PCS-F
9. Setting the Ink Section
1)
Set the ink fountain.
A CAUTION
Stop the press before setting. Failure to follow this instruction
may
result in
an
injury.
Optional Accessories Edition - 20
£WARNING
Close
the
cover
opened
after
setting.
Failure
to
follow
this
instruction
may
result in a serious injury.
Open the non operation side cover and shift the ink form roller release
lever (1) in the direction
of
the arrow
(~,~position).
After shifting the lever, close the cover opened.
Push the ink fountain
(1) against the ink fountain roller and put the fixing
knobs (2) into the brackets. Then tighten the knobs to fix the ink fountain.
«NOTICE»
When
turning the ink fountain roller with no ink
in
the ink fountain, the
ink fountain roller may be damaged, therefore please be careful.
«NOTICE»
Before setting the ink fountain, wipe
off
any foreign particles in the ink
fountain and on the ink fountain roller. Apply oil on the side edges
of
the ink fountain. This oiling assures smooth fountain roller rotation.
Failure
to
follow this instruction may result in damage
to
wearing out
of
the side edges
of
the ink fountain
and
ink fountain roller.
To Next Page
Loading...
Need help?
General
