Maintenance after the Printing
«NOTICE»
Be sure to do the maintenance
after
the printing to keep the press in top operation condition.
1.
Cleaning the Ink Section
A
WARNING
Stop
the
press
before
cleaning. Failure to
follow
this instruction
may
result
in a
serious
injury.
Remove the ink in the ink fountain.
Loosen the
ink fountain fixing knobs and pull the ink fountain downwards.
Clean the side edges
of
the ink fountain roller,
both
sides
of
the
ink
fountain, and fountain blade edge well.
«NOTICE»
1.
Do
not
use
any
powerful
corrosive
acid
or
chlorine type cleaning
solution on the metal. The metal
may
corrode when the
acid
or
chlo-
rine reacts with the water.
Example
of
powerful corrosive chemicals:
Plate cleaner {powerful acid)
Blanket cleaner (chlorine type}
2.
If
the press will
not
be
operated for 3 days
or
more,
apply
the rust
preventive oil on the
ink
fountain roller after cleaning it.
Also
if
the printing room environment is one with a high temperature
and
damp, the metal will easily corrode
and
rust. Therefore in this
environment when
not
using the press the following day, apply the
rust preventive oil
on
the
ink
fountain roller
after
cleaning it.
Mount the ink roller cleanup attachment
on
the bracket.
Maintenance Edition - 1
To Next Page
Loading...
Need help?
General
