Chapter 1 Operation Procedures
RP520-220F
Operation Edition - 6
Push the punch lever down slowly until it stops
completely and so that the punch holes are made in
the plate.
(Note)
1.
Do not use the RP520-220F to make the
holes in the paper.
If
making the holes in the plate with the
slip sheet, the slip
sheet
chips
may
expand and cling to the plate chips.
2.
When not using the RP520-220F for
more
than
a
month,
store
it
after
removing the cover, applying a little rust
preventive oil on the 2 punches
(1
), and
pushing the lever down 2 to 3 times.
To Next Page
Loading...
Need help?
General
