2-3 Operation Procedures
1) Set the blanket cleaning device.
Chapter
2 Blanket Cleaning Device
Put
the cleaning solution into the bottle and
mount
it
on
the bracket.
Never
use a blanket cleaning solution which has a flash point lower than
ss·c (131 ·F).
(Note)
On
the inside
of
the bottle cap, there is a rubber packing (1).
If
the
bottle is mounted without the packing, the cleaning solution
in
the cleaning tray may overflow. So please
be
careful.
When
shifting
the
blanket
cleaning
solution
changeover
lever
to
the
EIJ
position
in
the unit to be used, the cleaning solution is supplied
in
the tray. With the lever at this position, the proper volume
of
the cleaning
solution is automatically supplied into the tray.
Set the drain bottle
(a
big bottle, can,
or
other suitable container).
Optional Accessories Edition - 27
To Next Page
Loading...
Need help?
General
