5.4 Quick commissioning using the BOP-2 operator panel
Plug Basic Operator Panel BOP‑2 into the converter
Procedure
1. Remove the blanking cover of the converter.
2. Locate the lower edge of the BOP-2 housing in the matching recess of the converter housing.
3. Press the BOP‑2 onto the converter until you hear the latching mechanism on the converter
housing engage.
You have plugged the BOP-2 onto the converter.
❒
When you power up the converter, the BOP-2 will be ready for operation.
Commissioning
5.4Quick commissioning using the BOP-2 operator panel
SINAMICS G120C Converters
124 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
To Next Page
Loading...
Need help?
General