4.10.5 Default setting of the interfaces
Default setting 1: "Conveyor systems with 2 xed frequencies"
$FWXDOVSHHGYDOXH
$FNQRZOHGJHIDXOW
212))FORFNZLVH
212))FRXQWHUFORFNZLVH
)L[HGVSHHGVHWSRLQW
)L[HGVSHHGVHWSRLQW
:DUQLQJ
)DXOW
$2
',
',
',
',
',
'2
'2
DO 0: p0730, DO1: p0731 AO 0: p0771[0] DI0: r0722.0, …, DI5: r0722.5
Fixed speed setpoint 3: p1003, xed speed setpoint 4: p1004, xed speed setpoint active: r1024
Speed setpoint (main setpoint): p1070[0] = 1024
DI4 and DI5 = high: The converter adds both xed speed setpoints
Designation in the BOP-2: coN 2 SP
Default setting 2: "Conveyor systems with Basic Safety"
$FNQRZOHGJHIDXOW
212))ZLWKIL[HGVSHHGVHWSRLQW
)L[HGVSHHGVHWSRLQW
5HVHUYHGI¾UDVDIHW\IXQFWLRQ
$FWXDOVSHHGYDOXH
:DUQLQJ
)DXOW
$2
',
',
',
',
',
'2
'2
DO 0: p0730, DO1: p0731 AO 0: p0771[0] DI0: r0722.0, …, DI5: r0722.5
Fixed speed setpoint 1: p1001, xed speed setpoint 2: p1002, xed speed setpoint active: r1024
Speed setpoint (main setpoint): p1070[0] = 1024
DI0 and DI1 = high: The converter adds both xed speed setpoints.
Designation in the BOP-2: coN SAFE
Installing
4.10Connecting the interfaces for the converter control
SINAMICS G120C Converters
92 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
To Next Page
Loading...
Need help?
General