9.6. Display of the loading plan – 2
Loading plan display with NoMix
If MultiLevel is operated together with
display. Changes are not possible.
Loading plan display in stand-alone mode
In stand-alone mode on the other hand,
the I/O interface (chapter 7.8 "I/O
interface - NM2IO") is connected directly
to the MultiLevel for the control of the foot
and line valves.
For more information about stand-alone
mode, refer to chapter 7.1.6 "Stand-alone
mode".
The loading plan must now be entered
manually. The compartments can be
selected with the <numeric keys> <1>
to <x> and the product adapted accordingly.
Product selection in stand-alone mode
The product for the selected compartment
can then be selected with the <numeric
keys> <1> to <9> according to the
MultiLevel Instruction Manual MENU structure
To Next Page
Loading...
Need help?
General
