9.7.1.3. Chambers – 313
Compartment-specific parameters are set here:
Explanation of the submenus
1 Number of compartments
2 Compartments 1-10
3 Compartments 11-20
4 Compartments 21-30
5 Compartment monitoring
3131 – Number of compartments
Here the number of chambers is set.
At the present time, the maximum
number is limited to 24 compartments.
When the number of compartments is
altered, all the totalizers are reset.
9.7.1.3.1. Compartments 1-10 – 3132
Here further parameters are set for the first
10 compartments. Only display the number of
compartments set for the 'Number of compartments'
parameter.
The following section describes the parameters for
the first tank truck compartment. They start with
selection no.:
31321xx
These parameters must of course also
be set for all other compartments. That
means that the second compartment
starts with selection no.
31322xx
etc.
9.7.1.3.1.1. Compartments 1-10 – 31321
Various compartment-related data are set here:
Explanation of the submenus
1 Sensors
2 Installation
3 Data
4 Calibration limits
5 Pre-selection
MultiLevel Instruction Manual MENU structure
To Next Page
Loading...
Need help?
General
